Most internet problems are fixed by restarting your equipment in the right order. Your DigiiNet service has two parts: the antenna on your roof (powered by the antenna power adapter (also called a PoE adapter): a small white or black box, usually near your router, with a power cord and two network-cable ports labeled POE and LAN. It has a small light on it) and your TP-Link WiFi router. The antenna has to be fully awake before the router starts. This takes about 5 minutes.
Step by step
Unplug both power cords
Unplug the power cord of the antenna power adapter (the small box with ports labeled POE and LAN) from the wall or power strip. Then unplug the power cord of your TP-Link router.
Wait at least 30 seconds
Leave both unplugged for at least 30 seconds. A full minute is fine too.
Plug in the antenna power adapter first
Plug the antenna power adapter back in. Its light should come on. Leave the router unplugged for now.
Wait about 2 minutes
The antenna on your roof needs about 2 minutes to start up and connect to our network. Be patient. This is the most important step.
Plug in your TP-Link router
Now plug the router back in (and press its power button if it has one and it stays dark).
Wait 1 to 2 more minutes
The router's power light blinks while it starts up, then stays on. When the internet light (often a globe icon) turns green or white, you are back online.
Try the internet again
Open a web page on your phone, tablet or computer. If it still does not work, see "No internet at all" or contact us.
Before you call, see what to have ready.
Still need help?
Our local team is happy to help. Pick whichever is easiest for you.
- Email: support@digii.net
- Phone: 505-324-8014. Usually staffed weekdays around 10am–2pm, please call ahead.
- Voicemails and contact-form messages go straight to our team by email, and we'll get back to you.