DigiiNet uses Ubiquiti antennas (radios) on the roof. You never need to touch the antenna itself. It gets its power through a network cable from the antenna power adapter (also called a PoE adapter): a small white or black box, usually near your router, with a power cord and two network-cable ports labeled POE and LAN. It has a small light on it. Your model may look slightly different.
- The cable plugged into POE goes up to the antenna on your roof.
- The cable plugged into LAN goes to your TP-Link router (usually its Internet or WAN port).
Step by step
Find the antenna power adapter
Look near your router for the small box with the POE and LAN ports. Follow the cable from your router's Internet port if you are not sure.
Unplug its power cord
Unplug the power cord from the wall or power strip (or from the adapter). Do not unplug the network cables.
Wait 30 seconds
Leave it unplugged for at least 30 seconds.
Plug it back in
Plug the power cord back in. The small light on the adapter should come on and stay on.
Wait about 2 minutes
The antenna on the roof takes about 2 minutes to start up and reconnect. After that, restart your router too if the internet is still not working. See "Restart everything in the right order".
What the light on the adapter means
- On and steady: the antenna is getting power. Good.
- Off: no power. Check that the power cord is plugged in firmly and the outlet or power strip is on.
- Blinking: often a loose or damaged cable. Check that both network cables are clicked in firmly. If it keeps blinking, call us.
Before you call, see what to have ready.
Still need help?
Our local team is happy to help. Pick whichever is easiest for you.
- Email: support@digii.net
- Phone: 505-324-8014. Usually staffed weekdays around 10am–2pm, please call ahead.
- Voicemails and contact-form messages go straight to our team by email, and we'll get back to you.